Page 3
Hex Allen Key Safety Gloves Driver Gun Juxta Rectangle Assembly Instructions Line up the first base plate with the 4 screw inserts. Slide the crossbar extrusion over the base insert, but do not secure. Lightly fasten (2) 1/4 - 20 x 5/8“ screws to opposite corners with a hex key.
Page 4
(8) 1/4 - 20 x 1/2” screws, and clip the smaller plastic cord management piece over and use the (8) 1/4 - 20 x 5/8“ screws to secure the base to the top. the cord into the channel. keilhauer.com...