Related Manuals for keilhauer Buncha
Summary of Contents for keilhauer Buncha
- Page 1 Buncha Assembly Guide keilhauer.com 1450 Birchmount Road Toronto, Ontario, Canada M1P 2E3 T 416 759 5665 F 416 759 5723 1 800 724 5665...
- Page 2 Hex Allen Key Phillips Driver Hex button head cap screw (x32) Buncha Non - Powered Assembly Instructions Using the hex key, fasten the four legs with 1/4-20 x 3/4” Place the table top upside down on a blanket. Hex button head cap screw (x32).
- Page 3 Adhesive velcro hooks (x32) (x4) (x1) Buncha with Power Assembly Instructions Power Leg (x1) Place the table top upside down on a blanket. 1) This leg includes a channel for the power cable. Ensure this leg is fastened to the corner nearest the power outlet source.
- Page 4 Place the channel leg cover over the channel leg. Firmly Place self adhesive cable management clip (x1) at the press on the cover to ensure it is set in place and sits location above. flush with the leg. Fasten control box to underside of table at the location Unpackage the adhesive tabs with velcro (x2) that above.
- Page 5 If the table is being daisy chained to another ganged table, instead fasten the ganging plug to Power Linking Buncha Tables one of the (x3) velcro loops closest to the side which the table is ganged.
-
Page 6: Hardware Included
Buncha Ganging Instructions Tool Required Hardware Included Phillips Driver 1/4 - 20 x 3/4” Phillips (x4) Ganging Mechanism (x2) Table 2 Table 1 Top view Side view Locate the two pilot holes located at each end of the Ensure table edges are aligned and level with each other underside of the table. - Page 7 Modesty Panel Assembly Instructions Hardware Included for Modesty Panel Modesty Panel Clip (x7) Place the table on its edge on a blanket. When installing the modesty panel, ensure the folded fabric seam circled above is facing inwards. 1) Slide the modesty screen onto the table legs. Flip over and place the table in its final position.