Page 2
Ensure that some slack is left in the cord as it is loose at this point and will fall out when turning the table back into the where the power unit is inserted. upright position. keilhauer.com...
Page 3
Warning Ensure that the channeled end of the slab table leg goes against the underside of the table, not the ground, as shown in step 7. Before assembling the first, wider table leg, note the detail, as the channeled While feeding the power cord into the leg, gently lift the leg into place over end goes against the underside of the table.
Page 4
Juxta Slab with Power Designed by EOOS keilhauer.com 1450 Birchmount Road Toronto, Ontario, Canada M1P 2E3 T 416 759 5665 F 416 759 5723 1 800 724 5665 Making sure there is sufficient padding in place to avoid damages, turn the Clips are included to secure the power unit and cord into place.