Built-In Safety Features (Depending On Model) - Magliner HD Series Operator's Manual

1.2 Built-in safety features (depending on model)

Fold model:
 Before each use, make sure that the quick release lever (Figure 2, page 7) on
the handles is tightened properly.
It must be possible to tilt the load from the standing position without assistance.
The position of the handle section in relation to the frame must not be altered.
Dolly model:
 Figure A shows the 4
 Figure A shows the 4
be at right-angles to the brace.
Sliding Arm
Brace
 Each time before starting up the stair climber, make sure that the 4
attachment is properly folded away (retracted, Figure D).
Figure C: Folding Away
Important:
Do not use the 4
stair climber on stairs.
th
wheel attachment when retracted.
th
wheel attachment when extended. The sliding arm must
Sliding
Arm
Figure A
th
wheel attachment in the extended position while operating the
Page 4
Brace
Figure B
Figure D: 4th Wheel Attachment Retracted
th
wheel