How To Test The Step Edge Braking System - Magliner HD Series Operator's Manual

5.4 How to test the step edge braking system

Correct functioning of the step edge braking system is essential for safe operation of the stair
climbing system.
It is therefore essential that you check the function of the step edge braking system each time
before you use the stair climbing system.
1) Test the step edge braking system (without load):
a) Tilt the HD Powered Stair Climbing Hand Truck back until it is at an angle of approx.
45°. (Photo 1)
b) Switch on the stair climbing system by pressing the main switch.
c) When you push the unit forward, the step edge braking system should engage to
brake/stop the main wheels of the stair climbing system.
d) If the brakes do not engage uniformly (uneven braking on left and right wheel), do not
use the HD Powered Stair Climbing Hand Truck for climbing stairs until it has been
checked by an authorised Sano technician.
Photo 1
ca. 45°
Page 17