Table of Contents
Advertisement
Safety shutdown
The charger switches off if the battery pack has not reached a certain voltage
within 4.5 hours.
What to do after a safety shutdown:
1. Disconnect the charger from the mains
2. Disconnect the charger from the battery pack
3. Contact your Magliner dealer or Magline Customer Service
Technical data
Mains voltage supply (50/60 Hz, +/-15 %)
Power draw (no load)
Nominal rating
Charging voltage
Arithmetic charging current at 230 V / 50 Hz
Protection class
Safety shutdown after
The function of the charger has been tested in the following conditions:
- In a temperature range from -4°F to +122°F
- At a humidity of 5-85 %
Component specification: Climate Class B
6.1.4. Safety regulations
Use only for the purpose intended
The charger unit is designed exclusively for charging lead cell batteries containing liquid,
-
gel-type and fabric-type electrolyte.
- It is not permissible to charge NiCd or NiMH batteries or primary cells.
Do not use the unit in the following circumstances:
- If it is exposed to direct sunlight or is in a place where it could get wet or damp, or
- If the cooling slots are obstructed.
CE key-mark
The charger fulfils the criteria laid down in the low-voltage and electromagnetic compatibility
directive and is therefore CE-marked.
100-230 V AC
max. 1.5 W
48 W
24 V DC
2.0 A
IP30
4.5 h
Page 21
Advertisement
Table of Contents
