Latch On Functions - Wachendorff UR3274 Series Manual

2
or
3
to confirm
7.10

LATCH ON Functions

For use with input
(potentiometer 150KΩ) and with linear input (0...10V,
0...40mV, 0/4...20mA), it is possible to associate start value
of the scale (parameter 6
of the sensor and value of the scale end (parameter 7
to the maximum position of the sensor (parameter 8
configured as
It is also possible to fix the point in which the controller will
display 0 (however keeping the scale range between
and ) using the "virtual zero" option by setting
up.L.i.
in parameter 8
u.0in.
will reset after each activation of the tool; if you set
virtual zero remains fixed once tuned.
To use the LATCH ON function, configure according to
required operation the parameter
2 The tuning procedure starts by exiting the configuration after changing
the parameter.
86
UR3274U - User manual
Change the flashing
digit and move to the
next one using the
key.
Instrument loads
default settings
Pot. 1
).
std.
Latc.
(potentiometer 6KΩ) and
) to the minimum position
Lo.L.i.
If you set
u.0in.
Latc.
Enter password
Turn off and restart
the instrument
the virtual zero
u.0st.
2
9999
Pot.2
)
up.L.i.
Latc.
Lo.L.i.
or
u.0st.
the