Engine Speed; Fuel Filter Removal/Installation - MTD White Outdoor GT2550 Operator's Manual

E. Carburetor
If you think your carburetor needs adjusting, see your
nearest Authorized Tecumseh Servicing Dealer. Engine
performance should not be affected at altitudes up to 7,000
feet (2,134 meters). For operation at higher elevations,
contact your Authorized Tecumseh Servicing Dealer.
F. Engine Speed
To avoid serious injury NEVER tamper with the factory
setting of engine governor. Running the engine faster than
the speed set at the factory can be dangerous and will VOID
THE ENGINE WARRANTY.
G. Adjustments
DO NOT make any engine adjustments. Factory settings
are satisfactory for most conditions. If adjustments are
needed, contact your Authorized Tecumseh Servicing
Dealer.
H. Fuel Filter Removal/Installation
1. Remove hose clamp on hose. See Figure 13.
2. Slide hose clamp away from filter; repeat for other
clamp.
3. Remove hoses from fuel filter.
4. Place hoses on both ends of new fuel filter.
5. Install hose clamp.
6. Slide hose clamp toward filter; repeat for other clamp.
181-1203-14
1. Fuel Pump
2. Hose
3. Hose Clamp
4. Fuel Filter
5. Fuel Flow Direction Arrow
Figure 13. Replacing Fuel Filter
1
2
3
4
5
3
2
To Fuel Tank
Page
9