Installation & Device Activation - Launch J-Box 3 User Manual

Installation & Device Activation
Windows 10 u
1. It is important that you connect the device to your PC first.
a. Initial low-level drivers will be automatically downloaded and
installed as Windows Update recognizes your device.
2. Leave your device connected to your PC and proceed to Step 1
of the Installation & Device Activation process.
Insert the CD included with your
1.
an internet connection to get the latest drivers. If your PC does not have a
Disk Drive, please go to the Launch website and click on
J-Box 3
the Installer.
Run the Setup application, check the box next to
2.
and click Install.
ers:
s
J-Box 3
into your PC. You will need to have
Downloads
I accept the terms...
User Guide
to get
7 of 17