6.2 Troubleshooting
If the status indicating LEDs (Table 2-1Status Indicating LEDs) show other than normal
indications, or if anything wrong is detected at the human interface station, stop using the
product and contact your nearest Toshiba service shop.
For checking with the LEDs, refer to Table 6-1Check with LEDs.
For how to read RAS data, system log, etc., refer to the manual for the Engineering Tool.
Status
Name
Normal
operation
Repeat
error
Power
error
Note: The FAULT LED lights for about 2 seconds when power is switched on, then
goes out.
6F8C1406
Table 6-1 Check with LEDs
LED Indication
Status
FAULT
POWER
OFF
ON
Normal
Blink or
ON
Repeat error
ON
OFF
OFF
Power off
Cause
−
Error of station connected
to corresponding port; or
hardware error
Power off or hardware
error
6.2 Troubleshooting
6
33