Toshiba V Series User Manual page 23

Switch No. Name
1 SM0 Operation mode
2 SM1
3 SM2
4 RV1 Reserved
5 RV2 Reserved
6 RV3 Reserved
7 IP0 IP address type
8 IP1
Switch No.
Name
(MODE2)
1 RV1 Reserved
2 RV2 Reserved
3 RV3 Reserved
4 SGL Single mode
Operation mode
• Normally, use the standard settings for operation.
• For maintenance, reserved: Never use these modes.
IP address type
• V-series standard 1 Class B (general): Set it in connecting to an Integrated Controller
• V-series standard 2 Class B (general): For extension
• Tool setting: Set it for operating the hub unit by using the network parameters set with
6F8C1406
Table 3-2 Operation Mode Setting Table.
Function
SM2 SM1 SM0
off off
off off
off on
Other
Unused
Unused
Unused
IP1 IP0
off off
off on
on off
on on
Function
Unused
Unused
Unused
off: Normal (dual mode)
on: Single mode
the Engineering Tool.
Setting
Operation SM2=off
SM1=off
off Normal
SM0=off
on For maintenance
(Normal
setting)
off
Reserved
off
off
off
Operation IP1=off
IP0=off
V-series standard 1
(V-series
172.16.64.xx
standard 1)
Reserved
V-series standard 2
172.31.64.xx
Tool setting
Setting
off
off
off
off
Ethernet or a general Ethernet.
3.1 Switch Setting
Default
(Original
setting)
Default
(Original
setting)
11
3