Panasonic FV-17CU8 Installation And Operating Instructions Manual page 9

HOW TO INSTALL
CARA MEMASANG
6 Fix fan body firmly with 4 self-tapping screws Φ4.2x20.
(Fig.8)
6 Pasang badan kipas hingga kuat dengan 4 sekrup
4.2x20. (Gb. 8)
Φ
7 Fix adaptor assembly and fan body firmly with
hexagon screw removed in step ②. (Fig.9)
7 Pasang rangkaian adaptor dan badan kipas
hingga kuat dengan sekrup segienam yang
dilepas pada langkah ②. (Gb. 9)
■ After finishing installation, please confirm
whether fan body and adaptor assembly
are installed firmly.
Setelah pemasangan selesai, pastikan badan
kipas dan rangkaian adaptor terpasang hingga
kuat.
8 Connect duct.
2. Connect duct
8 Sambungkan pipa. → lihat halaman 11
2. Sambungkan pipa
9 Install ceiling board, keep the gap of flange and
ceiling board in the range of 2~3 mm. (Fig.10)
9 Pasang plafon dengan menyisakan celah selebar
2~3 mm di antara lidah dan plafon. (Gb. 10)
10 Insert the fixed spring of louver assembly into the
groove, install the louver to the fan body. (Fig.11)
10 Masukkan pegas terpasang di rangkaian kawat jala
ke dalam alur, pasang kawat jala / penutup ke badan
kipas. (Gb.11)
refer to page 11
Fan body
Badan kipas
Self-tapping screw Φ4.2x20 (4 PCS)
Sekrup
Hexagon screw
Sekrup hexagon
Screwdriver
Obeng
Flange
Keep the gap in the range of 2〜3 mm
Lidah
Sisakan celah selebar 2~3mm
Groove
Alur
Gloves
Louver
Sarung tangan
Kawat jala / penutup
Fig.8 / Gb.8
4.2x20 (4 BUAH)
Φ
Fig.9 / Gb.9
Gloves
Sarung tangan
Fig.10 / Gb.10
Ceiling board
Plafon
Fig.11 / Gb.11
Fixed spring
Pegas terpasang
9