Electrical Wiring - COMFORTPOOL EasyHeat Series User And Service Manual

3. Electrical wiring

1. Above electrical wiring diagram only for your reference, please subject machine posted the wiring
diagram.
2. The swimming pool heat pump must be connected ground wire well, although the unit heat exchanger
is electrically isolated from the rest of the unit. Grounding the unit is still required to protect you against
short circuits inside the unit.
Disconnect: A disconnect means (circuit breaker, fused or un-fused switch) should be located within sight of
and readily accessible from the unit. This is common practice on commercial and residential heat pumps. It
prevents remotely-energizing unattended equipment and permits turning off power at the unit while the unit is
being serviced.
30