Advertisement
A. Disconnect the other accessory from the
accessory connector of light kit harness.
B. Connect the 1-connection end of the Y
adapter to the accessory connector of the light
kit harness
Important: Do not connect the
2-connection end of the Y adapter to the
light kit.
C. Connect the wire harness and the other
accessory harness to the 2-connector end of
the Y adapter
1. Wire harness and other
accessory harness
2. Y adapter
Completing the Installation
1. Use the cable ties to secure the wire harness away from
sharp or moving parts.
2. Raise the cushion.
3. Connect the negative (-) battery cable to the battery.
(Figure
3).
(Figure
3).
Figure 3
3. Light kit harness
2
Advertisement
