KRAUSE & BECKER 69584 Owner's Manual & Safety Instructions page 12

Delayed or inadequate cleaning will permanently clog the Spray Gun.
Cleaning
Solvent Selection
Follow the paint manufacturer's recommendations for
cleaning, solvent type, and disposing of used solvent.
• Latex Paints: Do not use
this Spray Gun with latex paint.
IMPORTANT: Do not use mineral spirits on latex paints or
the mixture will congeal, making it very difficult to remove.
• Oil Based Paints: Use mineral spirits.
WARNING! TO PREVENT FIRE,
IF A FLAMMABLE SOLVENT NEEDS TO BE
USED,
ADHERE TO THE FOLLOWING:
a. Follow solvent manufacturer's clean up
instructions and safety precautions.
b. If collecting flushed solvents in
metal container, transfer to nonmetal
container, and flush metal container.
c. Work far away from any ignition
sources in a vapor free area.
d. Keep class ABC fire extinguisher nearby.
After each use:
1. Empty the Cup and clean it with the solvent.
2. Fill the Cup with solvent and spray it through
the Spray Gun into a container, while shaking
the Spray Gun. Once the Cup is empty, repeat
the process until the solvent comes out clean.
Page 12
NOTICE
Clean the Spray Gun IMMEDIATELY after use.
For technical questions, please call 1-800-444-3353.
3. Unplug the sprayer.
4. After disconnecting, point the Spray Gun into the
spent solvent container and squeeze the Trigger
again to make sure no pressure remains.
5. Remove Nozzle and soak it in solvent
until it is clean. Use old toothbrush and
toothpicks to remove any paint.
CAUTION: Do not immerse Spray Gun.
Note: Do not use metal objects to clean the
Nozzle to prevent damage to the passages.
6. Inspect fluid needle and make sure it is not bent.
If it is bent, have it replaced by a qualified technician.
7. Use appropriate solvent (see Solvent Selection,
left) to wipe down Spray Gun body.
8. Lubricate Spray Gun after cleaning.
A non-silicon oil or a light lubricant may be used
on threaded connections before storing.
Solution Disposal
After cleaning, dispose of cleaning solution
according to the solution manufacturer's directions
and local hazardous waste standards.
Item 69584