Miele K 31222 Ui Operating And Installation Instructions page 63

 Whilst counterholding the adjusting
bolts  with a screwdriver, tighten
nuts  on the appliance door at the
top with a screwdriver.
 Attach the appliance door and the
door panel using screws through re-
taining brackets :
- Drill holes in the door panel (mark the
position of the holes first).
- Screw in the short particle board
screws  (4 x 14 mm).
 Align the door panel along the depth
plane Z: loosen the screws in the long
slots at the top of the appliance
door  as well as under the appli-
ance door . By moving the door
panel, create a gap of 1/16" (2 mm)
between the door panel and the front
edge of the niche. Align according to
the adjacent door panels.
 Close the door, check it is fastened
correctly, and align it with adjacent
door panels.
 Tighten all the screws again.
Installation
63