Installing The Battery; Charging The Battery; Powering The Camcorder On/Off; Switching Modes - Minolta MN80NV User Manual

2. First Use

2.2 Installing The Battery

Insert the li-ion battery into the battery compartment with the metal contacts
facing the back of the camcorder. Push the battery in until it clicks.
Attention!
Please insert the battery in the correct way.

2.3 Charging The Battery

Connect your camcorder to the included AC adaptor with the USB cable provided
for charging.

2.4 Powering the Camcorder On/Off

Hold the POWER button for 2 seconds to power the camcorder on. To power the
camcorder off, press and hold the POWER button for a further 2 seconds. When
the LCD monitor is in the open position, the camcorder will automatically power
on and when the screen is in the closed position, the camcorder will
automatically power off. If the camcorder's battery is low, a "low power"
message will display on the screen and it will automatically shut down within a
few seconds.

2.5 Switching Modes

Press the MODE button to cycle between Video, Photo and Setup Mode. The
corresponding mode will be displayed in the top left corner of the screen. You
can also press the corresponding mode icon in the top left corner of the touch
screen to change modes.
3. Close the battery door.
1. Slide the battery door switch
forward to open the battery door.
2. Insert the Li-ion
battery into the
battery
compartment
as shown.
8