Kodak SLIDE N SCAN User Manual page 8

6. When the image is in place on the LCD screen, you can press the OK/Scan
button to scan.
7. The image will then automatically be saved on the SD card.
Note: Make sure the side of the negative upon which the words are printed is
oriented at the top.
CHOOSING FILM SETTINGS
1. Select the Film Settings icon from the Main Menu and press OK/Scan to
confirm.
2. Use the Arrow buttons to choose your desired type of film from the submenu
(Slides, Color Negatives, or Black and White Negatives). Press OK/Scan to
select.
3. Once you have selected the film type, a submenu for film size will appear on the
screen. Use the Arrow buttons to choose your desired size, and press OK/Scan
to select.
EN | 14
4. Now you will need to load the film into the proper converter tray for your
desired type of film. Please refer to page 13 for instructions.
5. A preview screen will pop up, and the scanner is ready for you to insert film.
6. You will then be able to view the film on the LCD screen, convert your photos
into digital images, and store them on the SD card.
PREVIEW MODE
No matter which menu you are in, you can return to Preview mode by double-
tapping the Home/Preview button.
ADJUSTING IMAGE BRIGHTNESS AND COLOR
• Brightness and color are preset automatically, so additional adjustment is
normally not needed.
• Brightness and color adjustments can only be made in Preview Mode.
To adjust brightness:
1. Press the Brightness/Backward
2. The brightness scale will be displayed on the LCD screen.
3. Use the arrow buttons to adjust.
4. Press OK/Scan to select your desired brightness.
button.
15 | EN