Configuration B
For Macs with a single Thunderbolt bus (all other Macs).
To Mac Thunderbolt port
1) Connect the included Thunderbolt cables to the mRack DIT as shown above. Connect the free end
of the cable to a Thunderbolt port on your Mac.
2)
Attach the included power cord to the power recepticle on the rear of mRack DIT and plug the
other end in to a power outlet.
LTO
Daisy-chain Thunderbolt buses together
using one of the included Thunderbolt cables
RAID
7
Need help?
Do you have a question about the mRack DIT and is the answer not in the manual?