mLogic mRack DIT Manual page 6

Intalling Hard Drives or SSDs
A
A.2
Discard plastic insert
A.4
Mount the drives using the included
M3x4 screws ONLY.
A.1
A.3
The tray accommodates HDD/SSD drives up to 9.5mm in height.
A.5
Carefully insert the populated drive trays
into mRack DIT. Engage latch to lock trays
in place.
Remove plastic insert from drive tray. Do not discard
the screws as they will be use to mount the HDD/SSD.
5