mLogic mRack DIT Manual page 27

Ready Fault status Encryption
status light light status light
Off Off
Off On or off
Green and
solid
Flashing
green (once Off On or off
per second)
Flashing
green (once
Off
per second)
Amber and
Off
solid
SCD SCD dot
Off Off
Off
Off
Off Off
Displaying an
Off On or off
error code.
Meaning
The drive has no power or is powered
Off
off.
The drive is powered on and in an idle
Off
state.
The drive is reading from the tape,
writing to teh tape, rewinding the tape,
Off
locating data on the tape, loading the
tape, or unloading the tape.
If the drive contains a cartridge when
the drive is turned on, the drive
completes POST and slowly rewinds
the tape (the process may take up to 10
Off
minutes). The light stops blinking and
becomes solid when the drive completes
the recovery and is ready for a read or
write operation. To eject the cartridge,
press the Unload button.
The drive is displaying an error code
on the SCD. See Appendix C for error
code information.
26