Combination Keys; Temperature Alarm - K-Systems G95 Instruction Manual

5.6 Combination keys.

Action
Press alarm and UP key.
Press alarm and UP key.
Press Heat ON/OFF and setpoint key.
Press alarm and setpoint key to go into
powersave mode.
Note Powersave mode:
Now only a small LED will light, showing when the heat is active. All other functions
are kept normal. By switching off the display the energy is conserved and the battery
charge holding time prolonged.

5.7 Temperature alarm

The temperature alarm indicates too high or too low temperature.
The alarm will be activated if the temperature rises or falls more than 0.5° C from the setpoint.
There will be an acoustic signal and the red LED light in the alarm key will be activated.
Action
Press alarm key to mute the acoustic signal.
Press alarm key once again to bring the
signal back on.
Note The red LED light and the acoustic signal will turn off when the temperature stabilises
to the setpoint level.
Key
Key
Page 11
Instruction manual - G95
Display
The keyboard is
locked.
The keyboard is
unlocked.
Switches between
temperature and
time
Switches off the
display
Kivex Biotec Ltd