Advertisement
Care, Cleaning and Storage
Cleaning After Use
1.
Switch off at the power outlet and
unplug the power cord.
2. Ensure the blender has
completely stopped operating
before removing the cup from the
motor base.
3.
Hold the motor base with one
hand and with the other hand
turn the assembled cup
anti-clockwise in the direction of
the 'OFF' symbol on the motor
base. Lift the assembled cup from
the motor base to remove.
4. Flip the cup so that the blade
holder is at the top (See Fig. 8).
5. Wash the blending blade holder
in warm soapy water and dry
thoroughly.
WARNING: Blades must
be handled carefully as
they are sharp!
12
6. Ensure all liquids and foodstuffs
7.
NOTE: Do not place any part
of the blender, including the
blending cup and sports bottle
in the dishwasher. Dishwashers
vary in the market and some
dishwashers may have hot spots
that may distort the plastic.
Fig. 8
NOTE: There are rubber seals
situated underneath the
blending blade, reusable lid
and sports bottle drinking lid to
prevent leaking. In case these
seals come out, wash in warm
soapy water, rinse and dry
thoroughly. Correctly refit the
seals into the lid or inside the
blade holder before using.
have been removed from the
cup. Wash the cup with warm
soapy water. Use a plastic
bottle brush to clean any tough
foodstuffs left inside the cup.
Wash the cup and reusable lid
in warm, soapy water. Rinse and
dry thoroughly.
Ensure all liquids and foodstuffs
have been removed from the
sports bottle. Use a plastic bottle
brush to clean any tough
foodstuffs left inside the bottle.
Wash the sports bottle and
drinking lid in warm, soapy water,
rinse and dry thoroughly.
Advertisement
