Saving Found Frequencies - Radio Shack 20-163 User Manual

Searching
Notes:
• If you lock out all the frequencies in a search bank and only that
search bank is activated, "
and the scanner does not search.
• Signal Stalker II still performs a fine step search for locked out
signals. Signal Stalker II will not stop on the signal, but scan
may take longer.
To lock out a frequency:
When the scanner stops on a frequency, press L/OUT.
To review and unlock frequencies:
1. Press SRCH to enter search mode.
2. Press FUNC then L/OUT. The first locked-out frequency and
lockout list appear. If the search bank has no locked-out
frequencies, "No Lockout"
3. Press or to review the list. The current position and the
total locked-out number also appear as
(Example: Lockout 10 of 30.)
4. (Optional) To unlock a frequency, select the frequency then
press CLEAR.
5. Press FUNC then L/OUT again to exit.
To unlock all frequencies in a search bank:
1. Press SRCH.
2. Select the search bank.
3. Press FUNC then press L/OUT. The Lockout list appears.
4. Press FUNC then 6. "Clear entire list?"
5. Press 1. "List cleared"
cancels the clearing.
All ranges Locked out!" appears
appears.
"Lockout XX of YY."
appears.
appears. Pressing any other key
26

Saving Found Frequencies

To save a frequency found during a search:
1. When the scanner stops on a frequency, press FUNC then
"Store in ChXXX?"
PROG.
flashes.
2. To change the target channel, enter the bank and channel
number.
3. Press ENT. "Channel Stored!"
search resumes.
Searching
appears and the frequency
appears briefly, then the
27