Commissioning; Mounting Of Mattress; Mounting Of Side Rails - RotoBed Home User Manual

3. Commissioning

3.1 l Mounting of the mattress
RotoBed®Home comes with a mattress consisting of a main part and a foot part.
The main mattress has 5 buttons on the back.

First place the three lower buttons in the grooves at the bottom of the bed.

Slide the mattress towards the foot end.

Now press the two buttons in the centre of the mattress into the corresponding holes
in the middle of the bed.

Similarly, the foot mattress has two buttons, which fit into the two round holes in the bed.

The mattress is best protected by using the semi-impermeable cover in stretchable
incontinence foil.
3.2 l

Mounting of side rails

RotoBed®Home can be delivered with side rails made of metal or oak veneer.
Regardless of material the side rails are mounted and removed in the same way:
Press the small fitting underneath while lifting the bed rail.
The side rails can simply be put back into place and will automatically lock.
NB! The side rails should only be mounted or not mounted. Do not leave them upright and
loose. This may cause squeeze risk and damage to the bed during rotation.
5