Reset Motors - RotoBed Home User Manual

13. Reset of motors
If the bed is not working as expected, it can be reset via the remote control.
NB! In the event of disconnection of the motor cable, it may be necessary to reset the system.
NB! If the bed is equipped with bed rails, these must be removed before resetting.
If the need for reset is repeated, the bed must be serviced.
18

Simultaneously press both sides of the leg-part key on the remote
control (leg-part up + leg-part down)

There is now a constant beep sound for about 10 seconds.

Continue to hold the keys even after the beep stops.

The bed will now move all engines to their outermost positions. This
may take up to one and a half minutes.

The bed is now reset and ready for use.