Table of Contents
Advertisement
Quick Links
Provence Collection
3 Door Wardrobe
Step By Step Assembly Instructions
PRE-ASSEMBLY PREPARATION
1. Please check the part contents before attempting to assemble this product. A full checklist of
components is given in this leaflet. If any components are missing, please contact the retailer from
whom you bought this product.
2. This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE
CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
3. This product takes approximately 90 MINUTES to assemble with 2 PEOPLE.
4. The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
5. Read this leaflet in full before commencing assembly.
6. You will require a cross head screwdriver to assemble this product.
7. WE RECOMMEND that you lay a protective cloth on your carpet to prevent marking.
Page 1
Advertisement
Table of Contents
Related Manuals for feather&black Provence 3 Door Wardrobe
Summary of Contents for feather&black Provence 3 Door Wardrobe
- Page 1 Provence Collection 3 Door Wardrobe Step By Step Assembly Instructions PRE-ASSEMBLY PREPARATION 1. Please check the part contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact the retailer from whom you bought this product.
- Page 2 Panel and Fittings Identification Item Description Qty. Item Description Qty. Item Description Qty. Base Left Side Panel Right Side Panel Centre Upright Panel Top Cornice Narrow Back Panel Wide Back Panel Wide Door Frame Narrow Door Frame Wide Hanging Rail Narrow Hanging Rail Shelf Hanging Rail Supports...
- Page 3 Step 1 With the aid of an assistant, locate the drawer frame (M) to the base unit (A) as shown. Step 2 Use the adjustable levelers POSTS to level the wardrobe base TO REAR! (A) on uneven floor surfaces. Place dowels (Q) both top and bottom of each panel.
- Page 4 Step 3 IMPORTANT NOTE: PLEASE ENSURE THE DOORS ARE UNLOCKED PRIOR TO ASSEMBLY With the aid of an assistant, locate the wide door frame (H) onto the wardrobe and locate the narrow door frame (I) onto the wardrobe as shown. First secure to the side panels using four 25mm csk screws (O) per side, inserted through...
- Page 5 Step 5 Before attaching the back panels (F & G), move the wardrobe close to the position where it will be used. With uneven floors you may need to lean the wardrobe slightly left or slightly right to ensure that the doors remain square. With the side of an assistant, hold the wardrobe in position and secure the wide back...
- Page 6 Step 7 Move the wardrobe into position and then check that the doors are aligned correctly. If necessary adjust the door hinges as shown below. Vertical Adjustment Horizontal Adjustment Lateral Adjustment...
- Page 7 Provence Collection 3 Door Wardrobe It may be required to adjust the top and bottom locking pins on the door frame, enabling the hooks to locate and lock onto the pin. If required loosen and remove screws on the pin and locate into the correct position, then re-attach the screws.
Need help?
Do you have a question about the Provence 3 Door Wardrobe and is the answer not in the manual?
Questions and answers