Advertisement
Archie Cabin Bed Assembly Instructions
Important – Please read carefully and retain for future reference
The recommended mattress size for this bed is 900mm x 1900mm, with a maximum thickness of 240mm.
Ventilation of the room is necessary in order to keep the humidity low and to prevent mould from forming in and around the bed.
Do not use the bed if any of the components become broken or damaged.
Please ensure that all fixings are tight before use. You should also periodically tighten all fixings.
WARNING – High beds, such as this, are not suitable for children under six years of age, due to the risk of injury from falling.
WARNING – High beds, such as this, can also present a serious risk of injury from strangulation if not used correctly. Never attach
items to or hang items from the bed that are not designed to be used with the beds. Examples of such items include, but are not
limited to, ropes, cords, belts and bags.
WARNING – Children can be trapped between the bed and the wall. To avoid the potential risk of serious injury to children, the
distance between the top safety barrier and the wall should not exceed 75mm, or should be more than 230mm.
Step‐By‐Step Assembly Instructions
Pre‐Assembly Preparation
Please check the pack contents before attempting to assemble this product. A full checklist of component is given on page 2 of these
instructions. If any components are missing, please contact the retailer from whom you bought this product.
This product is heavy, so it should be assembled as near as possible to the point of use. Take care when lifting to avoid personal
injury or damage to the product.
This product takes 2 people approximately 45 minutes to assemble.
The fittings pack contains small items, which should be kept away from young children.
The screws can be quite sharp, so please handle with care.
Read these instructions in full before commencing assembly.
You will require an Allen key (provided) and a crosshead screwdriver (not provided) to assemble this product.
Once assembled, please double‐check all fixings to ensure that everything is secure.
Page 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for feather&black Archie Cabin Bed
Summary of Contents for feather&black Archie Cabin Bed
- Page 1 Archie Cabin Bed Assembly Instructions Important – Please read carefully and retain for future reference The recommended mattress size for this bed is 900mm x 1900mm, with a maximum thickness of 240mm. Ventilation of the room is necessary in order to keep the humidity low and to prevent mould from forming in and around the bed. Do not use the bed if any of the components become broken or damaged. Please ensure that all fixings are tight before use. You should also periodically tighten all fixings. WARNING – High beds, such as this, are not suitable for children under six years of age, due to the risk of injury from falling. WARNING – High beds, such as this, can also present a serious risk of injury from strangulation if not used correctly. Never attach items to or hang items from the bed that are not designed to be used with the beds. Examples of such items include, but are not limited to, ropes, cords, belts and bags. WARNING – Children can be trapped between the bed and the wall. To avoid the potential risk of serious injury to children, the distance between the top safety barrier and the wall should not exceed 75mm, or should be more than 230mm. Step‐By‐Step Assembly Instructions Pre‐Assembly Preparation Please check the pack contents before attempting to assemble this product. A full checklist of component is given on page 2 of these instructions. If any components are missing, please contact the retailer from whom you bought this product. This product is heavy, so it should be assembled as near as possible to the point of use. Take care when lifting to avoid personal injury or damage to the product. This product takes 2 people approximately 45 minutes to assemble. The fittings pack contains small items, which should be kept away from young children. ...
- Page 2 Panel and Fittings Identification ...
- Page 3 Step 1 Bolt the head end (A) to the ladder (F) using the short bolts (H) and the Allen key (L). H x 3 ...
- Page 4 Step 3 Insert the cams (J) into the three side rails (C, D, E), lining up the threaded hole horizontally. Attach the three side rails (C, D, E) to the foot end (B) using the dowels that are attached to the side rails. Insert the long bolts (I) through the foot end (B) into the three side rails (C, D, E) and tighten with the Allen key (L). I x 5 J x 5 A L F I Step 4 ...
Need help?
Do you have a question about the Archie Cabin Bed and is the answer not in the manual?
Questions and answers