feather&black Noah High Sleeper Quick Start Manual

Noah H igh S l ee p er
IMPORTANT READ CAREFULLY – RETAIN FOR FUTURE REFERENCE
Thank you for buying the Noah H igh Sl eep er
•
Please take a few quite minutes to read these instructions
•
It is recommended that this product is assembled by two adults.
•
This product contains small parts, keep small children clear of the assembly area
•
Lay out the parts on a clean, flat surface and compare with the parts checklist. Save all packaging until
assembly is complete to avoid accidentally discarding fittings

PRODUCT SAFETY

•
Recommended Mattress Size: 190cm x 90cm. The thickness should not exceed the line marked on the
upper end when assembled as a bunk
•
Do not allow children to jump on the bunks. Using this furniture other than for its intended purpose
could cause damage to the structure or serious injury to your child
•
Be aware of the danger of young children (under 6) falling from the upper bunk
•
All assembly fastenings should always be tightened properly and care should be taken that no fittings
are loose
•
Before each usage or assembly, inspect bunk bed for damaged hardware, loose joints, missing parts or
sharp edges. Do not use bunk bed if any parts are missing or broken
•
Always use the ladder for entering and leaving the upper bunk
•
Never attach or hang items to any part of the bunk bed that are not designed for use with the bed
•
This product has passed EN 747-1:2007

PRODUCT CARE

•
Wipe clean using a soft damp cloth followed by dry cloth
Do not use abrasives or cleaning products which may contain ammonia or solvents
•
Take Care when handling or moving the furniture. Careless handling can damage furniture, try to lift
rather than drag

TOOLS REQUIRED

•
Please use Philips Head Screwdriver (not included) and Allen key part F, J (included) to assemble the
Noah High Sleeper