Inserting/Removing The Memory Card - Panasonic HC-X1500 Basic Operating Instructions Manual

Inserting/removing the memory card

Inserting the memory card
The memory card to use with the unit should always be formatted on the unit. (l 38)
≥ Formatting the memory card will erase all of the recorded data which cannot be restored.
A Card slot cover
B Label side
1
Open the card slot cover.
2
Insert the memory card into the card slot.
≥ Card slot 1 and card slot 2 can each insert one memory card.
≥ With the label facing in the direction indicated in the diagram, push in until there is a
click.
Do not force or apply excess force when inserting the memory card.
3
Close the card slot cover.
Removing the memory card
1
Open the card slot cover.
≥ Confirm that the card access lamp is not flashing in orange.
≥ Data is being written/loaded when the card access lamp is flashing in orange, so do not
remove the memory card.
2
Press in the memory card further into the main unit and let go.
≥ Pull the memory card straight out when it is released from the card slot.
3
Close the card slot cover.
Preparing the memory card
 
35
(ENG) DVQX2031