Charging The Battery - Panasonic HC-X1500 Basic Operating Instructions Manual

4k
Hide thumbs Also See for HC-X1500:
Table of Contents

Advertisement

Power supply

Charging the battery

The battery is not charged at the time of purchase. Use only after charging sufficiently.
It is recommended that you have one extra battery.
≥ It is recommended to perform charging of the battery in a location with ambient temperature
of 10 °C to 30 °C (same for the battery temperature).
≥ Use the supplied AC adaptor. Do not use the AC adaptor of another device.
≥ The supplied AC cable is dedicated for this unit. Do not use with any other device. Also, do
not use AC cable from other device on this unit.
≥ The battery is not charged when the power is on.
 
∫ Connecting to the AC outlet
It is possible to use this unit with power supplied from the AC outlet by turning on the unit with
the AC adaptor connected.
Even when you use the AC adaptor for recording images, keep the battery connected.
This allows you to continue the recording even if a power failure occurs or the AC adaptor is
unplugged from the AC outlet by accident.
≥ The AC adaptor is in the standby condition when the mains plug is connected. The primary
circuit is always "live" as long as the AC adaptor is connected to an electrical outlet.
28
DVQX2031 (ENG)
1
Connect the AC cable to the AC
adaptor and the AC outlet.
≥Insert the plugs as far as they will go.
2
Connect the AC adaptor to the
<DC IN 12V> terminal.
≥As the charging lamp lights up green,
charging starts. It will turn off when the
charging is completed.
≥If the charging lamp flashes, refer to
page 9.
≥The DC plug of the AC adaptor,
depending on its angle, may block your
view of the charging lamp. To check the
charging lamp status, adjust the angle
of the DC plug.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hc-x2000

Table of Contents