Dometic CoolAir RTX2000 Operating Manual page 17

RTX2000, SPX1200IC
7.6 Using the air conditioner
➤ Set the required temperature (chapter "Setting the temperature" on page 17).
➤ Set the required mode (chapter "Setting the mode" on page 18).
I
NOTE
If the required temperature is not reached in the energy-saving mode or
at a low fan speed, increase the fan speed or switch to BOOST mode or
to AUTO mode.
➤ Set the timer (chapter "Setting the timer" on page 19), if you want the parking
cooler to switch off automatically after the required time.
7.7 Setting the temperature
I
NOTE
Depending on the set unit for the temperature, the temperature is
changed in steps of either 1 °C or 2 °F.
Control panel
➤ Press the
button until the
➤ Press the
or
➤ Press the
button to save the value.
Remote control
➤ Press the
+ button to increase the temperature.
➤ Press the
– button to decrease the temperature.
➤ To save the value don't press any button for more than 5 seconds.
EN
symbol is displayed.
button to set the desired temperature.
Using the parking cooler
17