Fayat Group Bomag BVT 65 Operating Instruction, Maintenance Instruction page 91

Cleaning the spark plug
Fig. 97
Troubleshooting – What to do if the engine has flooded
Protective equipment:
Special tool:
1. Pull off the spark plug socket (1).
2. Unscrew the spark plug with a 16 mm spark plug spanner
(2).
3. Operate the recoil starter several times.
4.
Dry the spark plug with a clean cloth or blow it dry with com-
pressed air.
5. If necessary, clean the spark plug with a wire brush.
6. Screw the spark plug carefully in by hand and once the
sealing surface of the used spark plug is in contact tighten for
another 1/8 to 1/4 turn with the spark plug spanner.
7. Plug the spark plug socket back on.
8. Repeat the starting procedure.
BVT 65
n Working clothes
n Protective gloves
n Safety goggles
n 16 mm spark plug spanner
CAUTION!
Danger of eye injuries caused by particles
flying around!
– Wear your personal protective equipment
(safety gloves, protective working clothes,
goggles).
95