Foreword - Fayat Group Bomag BVT 65 Operating Instruction, Maintenance Instruction

Introduction – Foreword

1.1 Foreword

8
BOMAG manufactures machines for earth, asphalt and refuse
compaction, stabilizers/recyclers as well as milling machines
and pavers.
BOMAG's vast experience in connection with state-of-the-art
production and testing methods, such as lifetime tests of all
important components and highest quality demands guar-
antee maximum reliability of your machine.
The machine described in this manual complies with the applicable
standards and safety regulations.
If your machine is used in traffic on public roads, it must comply
with all applicable national legal regulations. The driving permit
must be acquired from the responsible authorities.
The machine is equipped with latest technology. Now it's a matter
of handling your machine properly and keeping it in good shape.
These instructions will provide you with all necessary information.
Read and follow these notes before starting to operate your
machine!
In case of operating errors, inadequate maintenance or the use of
unapproved fuels and lubricants all warranty claims will become
null and void.
This manual was written for operators and maintenance personnel.
These operating and maintenance instructions are part of the
machine.
You should only operate the machine in compliance with these
instructions.
Strictly observe the safety regulations.
If you are not yet acquainted with the controls and indicating ele-
ments on this machine, you should thoroughly read the corre-
sponding section Ä Chapter 4 'Display and control elements'
on page 39beforehand.
The description of the individual operating steps, including the
notes on safety to be followed, can be found in chapter "Operation"
Ä Chapter 6 'Operation' on page 47.
Thorough maintenance of the machine guarantees far longer safe
functioning of the machine and prolongs the lifetime of important
components. The effort required for this purpose is by any means
lower than the faults that may occur in case of non-compliance.
The machine must only be serviced by qualified and authorized
personnel. A description of all necessary service work as well as
information on fuels and lubricants can be found in the chapter
Ä Chapter 8 'Maintenance' on page 63.
"Maintenance"
For your own personal safety you should only use original spare
parts from BOMAG.
For your machine we offer service kits to make maintenance
easier.
In the course of technical development we reserve the right for
technical modifications without prior notification.
BVT 65