Fayat Group Bomag BVT 65 Operating Instruction, Maintenance Instruction page 81

Fig. 83
Fig. 84
Fig. 85
Protective equipment: n
n
WARNING!
Danger of burning on hot components!
– Wear your personal protective equipment (protec-
tive gloves, protective clothing).
1. Park the machine in secured condition
the machine in secured condition.' on page 55.
2. Clean the area around filler and drain plug.
3. Unscrew the drain plug, tilt the machine backward and catch
running out oil.
4. Stand the tamper on its foot and secure it against tipping
over.
5. Clean the drain plug and screw it back in with sealing com-
pound (low-strength, e.g. spatre parts number 009 700 16).
7. Fill in fresh oil up to the bottom edge of the filler bore.
8. Clean the filling plug and screw it back in with a new seal
ring.
10. Check the oil level in the inspection glass, correct if neces-
sary.
The upper edge of the inspection glass equals
the bottom edge of the oil filling bore.
11. Dispose of oil environmentally.
BVT 65
Maintenance – Annually
Working clothes
Protective gloves
Ä Chapter 6.4 'Park
85