tams elektronik LC Series Manual page 4

English
Checking the package contents
Please make sure that your package contains:

one kit, containing the components listed in the parts list (page 21)
and one PCB or

one ready-built module;

two socket terminal strips (1 x 3-pole, 1 x 5-pole);

additionally with LC-module 16: one dim switch and one light
sensitive resistor;

additionally with LC-module 24: one diode 1N400x, x > 2;

a CD (containing the manual and further information).
Required materials
For assembling the kit you need:

an electronic soldering iron (max. 30 Watt) or a regulated soldering
iron with a fine tip and a soldering iron stand,

a tip-cleaning sponge,

a heat-resistant mat,

a small side cutter and wire stripper,

as necessary a pair of tweezers and long nose pliers,

electronic tin solder (0,5 mm. diameter).
In order to connect the module you need wire. Recommended
diameters: > 0,05 mm² for all connections.
You can connect small light bulbs or LEDs (via series resistors) to the 5
outputs of the LC module. Light bulbs, LEDs and series resistors are not
included in the package. For further information on the maximum
number of bulbs or LEDs to be connected to one output see section 7.
Page 4
LC modules