tams elektronik LC Series Manual page 16

English LC modules
LC-21 "Funfair flow effect lighting 1": The 5 outputs generate a
light flow sequence. After the first run through the output 5 stays on, after
the second run through the output 4, and so on, so that after 5 cycles all
connected lamps or LEDS are switched on. With the cycles 6 to 10 the
outputs are switched off in reverse order. If the input JP2 is switched to
earth, the light sequence switches off after the completion of the active part
of the program. If the input remains open, the program is repeated
constantly.
LC-22 "Funfair flow effect lighting 2": The five outputs generate a
light flow sequence. After being switched off, the outputs continue to glow
for a short time. In the first cycle one output stays on and one continues to
glow, in the second run through two outputs stay on and two continue to
glow and finally, in the third cycle three outputs stay on and two continue to
glow. If the input JP2 is switched to earth, the light sequence switches off
after the completion of the active part of the program. If the input remains
open, the program is repeated constantly.
LC-23 "Funfair flow effect lighting 3": The five outputs generate a
running light sequence, which changes the running direction at random.
If the input JP2 is switched to earth, the light sequence switches off
after the completion of the active part of the program. If the input
remains open, the program is repeated constantly.
LC-24 "City lighting": After switching on the module (in other words
as soon as the switching input is connected to earth) the five outputs
are switched on one after the other. The length of the delay between
switching on the module and gradually switching on the outputs is
varied at random. The overall duration between switching on the
module and the fifth output is 40 seconds to 2.5 minutes. When
switching off, the sequence is altered and the length of the delay is
shortened.
Page 16