Connecting Light Bulbs - tams elektronik LC Series Manual

LC modules
LC version
LC-18
LC-24
* e.g. by closing a switch

7.2. Connecting light bulbs

As a rule you can connect one or two bulbs to one output. Bulbs are
not polarized. Connect one side to the output, the other to the return
conductor.
Caution: The maximum current of 100 mA per output should not
!
be exceeded. In this case the output would be damaged. For that
reason strictly uphold the specification of the current consumption
(given in mA) on the bulb´s socket or it´s packaging.
Function of JP2
JP2 connected to earth à "standing vehicle".
JP2 open à "moving vehicle".
JP2 connected to earth* à gradually switching
on of the outputs.
JP2 open à gradually switching off of the
outputs.
English
Page 25