Then attach and secure the connectors with the thumbscrews on the
sides of each cable connector.
To return the unit to a one-piece configuration, remove the cables
and standoffs, line up the 9-pin connectors, and push the two pieces
together.
2.2 Mounting and Connecting the Computer/Display Unit
WARNINGS
locations that will obscure the driver's view of the road.
mounted. In an accident, a loose component could
strike an occupant of the vehicle.
cables, or brackets in your vehicle's air bag deployment
zones. Refer to your vehicle's owner's manual or call the
vehicle manufacturer if you are unsure where the air
bag deployment zones are.
12
Figure 2.1c
Secure the connecting cable by fastening the
thumbscrews into the standoffs.
16/September/2015