Page 1
USER MANUAL BID 02 WOODBRIDGE Remote Control Illustration Thank you for choosing our product.Please read the instructions carefully before installation and keep it available for future maintenance or reference. Customer Service Phone: 562-229-0088. (Monday - Friday 9 AM - 5 PM Pacific Time) Or Email: help@woodbridgebath.com...
WOODBRIDGE REMOTE CONTROL ILLUSTRATION Installation Preparation 安装准备 Remote control installation Remote control hanger installation (1) Place the remote control hanger upright on the (2) Put the expansion tube into the wall hole pre-installed area of the wall and mark the location and the hanger is tight against the wall.
Page 3
WOODBRIDGE REMOTE CONTROL ILLUSTRATION Installation Preparation Remote control installation Remote control hanger installation (Only for the hanger matching with fixing board and foam gasket.) (1) Clean and dry the pre-installed area of the (2) Remove the adhesive tape on the back remote control rack on the wall.
Page 4
WOODBRIDGE REMOTE CONTROL ILLUSTRATION Usage Instruction Remote control illustration Rear cleaning/massage Water increasing Nozzle moving forward Front cleaning/massage Water reducing Nozzle moving backward Drying Auto rear cleaning Auto front cleaning Indicator light(only Stop/Energy saver visible when the light is on)
WOODBRIDGE Usage Instruction Rear/Front cleaning ·Press “Rear cleaning/massage” button, the indicator light is on showing current water temperature level, it starts rear cleaning; Press again “Rear cleaning/massage” button to shift to massage to massage cleaning (nozzle moves forward and backward to expand cleaning area). The cleaning will last for a circle and stop automatically, while it will stop immediately if the user presses “STOP”...
Page 6
WOODBRIDGE Usage Instruction Water volume adjustment · Presss “+” or “- ” button when it is under function of rear cleaing or front cleaning, the indicator light will be on showing current water volume level, adjust water volume by levels.
WOODBRIDGE Usage Instruction Energy saver Keep pressing “STOP” button for more than 3S to enter energy saving mode, the indicator light will be off and energy saving light will be on. Keep pressing “STOP” button again for more than 3S to exit energy saving mode, the indicator light will be on and energy saving light will be off.
WOODBRIDGE REMOTE CONTROL ILLUSTRATION Usage Instruction Temperature adjustment · Water temperature adjustment Short press the “WATER TEMP” button to adjust the water temperature. The indicator will show the water temperature level if it’s on. When the indicator is off, the water level is 0. Short press this button to adjust water temperature level from 0 to 5 in cycle.
WOODBRIDGE REMOTE CONTROL ILLUSTRATION Usage Instruction Other Operations User Code · The user code needs to be set to avoid disturbance from remote controls when more than one smart toilets are used in the house. Turn on the toilet for setting while turning off others.Press user code combination buttons (Press “STOP”...
Need help?
Do you have a question about the BID 02 and is the answer not in the manual?
Questions and answers