Safety Of Others; Cleaning And Maintenance - Black & Decker BX650G Original Instructions Manual

ENGLISH
• Never pull the power supply cord to
disconnect the plug from the socket.
Keep the power supply cord away from
heat, oil and sharp edges.
• Be careful if hot liquid is poured into the
food processor or blender as it can be
ejected out of the appliance due to a
sudden steaming.
• Do not place the appliance on or near
heat sources or in a heated oven.
• Avoid spilling water on the Power Base.
• Do not use the appliance near flammable
or explosive materials.
• Do not use the appliance outdoors.
• Operate the appliance only with dry
hands.
• If the power supply cord is damaged
during use, disconnect the appliance
from the power supply immediately.
• Do not touch the power supply cord
before disconnecting from the power
supply.
• Disconnect the appliance from the power
supply when not in use, before fitting or
removing parts and before cleaning.
• This appliance is not intended to be
operated by means of an external timer
or separate remote-control system.
• The outer surface of the blender may
become hot when in use.
• Allow moving parts to come to a stop
before removing any cover.
• Allow moving parts to come to a stop
before approaching.
• Unit must be attended in use.

Safety of others

• This appliance is not intended for use by
persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use
of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure
that they do not play with the appliance.
• Do not allow children or any person
unfamiliar with these instructions to use
the appliance.
• Do not allow children or animals to come
near the work area or to touch the
appliance or power supply cord.
• Close supervision is necessary when the
appliance is used near children.
4
(Original instructions)

Cleaning and maintenance

Make sure to disconnect appliance from
power supply before cleaning.
For blender
The Auto Clean function can clean the
blender easily and rapidly in complete safety.
1. Pour a little warm soapy water into the
Jar and turn the Speed Selector to "1"
position and press down the Pulse button
without releasing it for a few seconds.
2. Dismantle all detachable parts. Dissemble
the Jar from the motor unit and rinse it
under running water, then detach the
blade assembly from the jar assembly,
take the blade assembly out, finally
remove the jar base seal ring . In addition,
detach the measure cup from the jar
cover. Rinse the jar, blade, jar base, jar
cover and measuring cup under running
water.
3. Wipe the outer surface of motor unit and
with a damp cloth.
Note: Do not use abrasive cleanser and
never immerse motor unit in water for
cleaning
4. Dry all parts and then assemble them.
The method of assembling blender
attachment just is in opposite of its
detaching sequence.
Note: If any problem has been encountered
during using, never disassemble the Motor
Unit by yourself. There are no user
serviceable parts inside. Only contact the
authorized service facility for examination
and repair.