Receiving And Inspection - Shel lab FX14-2 Installation And Operational Manual

RECEIVING AND INSPECTION

Your satisfaction and safety require a complete understanding of this unit. Read
the instructions thoroughly and be sure all operators are given adequate training
before attempting to put the unit in service. NOTE: This equipment must be used
only for its intended application; any alterations or modifications will void your
warranty.
1.1 Inspection: The carrier, when accepting shipment, also accepts responsibility
for safe delivery and is liable for loss or damage. On delivery, inspect for visible
exterior damage, note and describe on the freight bill any damage found, and
enter your claim on the form supplied by the carrier.
1.2 Inspect for concealed loss or damage on the unit itself, both interior and exterior.
If necessary, the carrier will arrange for official inspection to substantiate your
claim.
1.3 Return Shipment: Save the shipping crate until you are sure all is well. If for
any reason you must return the unit, first contact your customer service
representative for authorization.
number and serial number.
1.4 Accessories: Verify that all of the equipment indicated on the packing slip is
included with the unit. Carefully check all packaging before discarding. The
FX14-2 is equipped with 3 shelves, 12 shelf clips and 4 leveling feet. The FX28-
2 is equipped with 6 shelves, 24 shelf clips and 4 leveling feet.
Supply nameplate data, including model
1
Section
3