Offices To Go OTGHABASE2 Assembly Instructions Manual page 5

STEP 5 - Assemble end
brackets and insert spacers
• Plastic spacers (Item K)
should be placed evenly on
the center portion of the
crossrail.
• Tighten all screws securely.
STEP 6 - Assemble Table Top
• Center frame (on all sides)
on the bottom of the table
top. Use screws (Item E) to
assemble base frame to the
bottom of the table top.
• Tighten screws securely.
• NOTE: Table top should
overhang base on the left and
right side by a minimum of 1"
and a maximum of 2.25".
5/6
www.officestogo.com
HEIGHT ADJUSTABLE TABLES
ASSEMBLY INSTRUCTIONS
revised 010720