Empire DVLL36 Series Installation Instructions

FOR USE ON MODELS: DVLL(36,48,60,72)BP,SP SERIES FIREPLACES ONLY
INSTRUCTIONS MUST BE LEFT WITH THE OWNER FOR FUTURE REFERENCE AFTER INSTALLATION.
DVLL36
DFF36LFPD
DFF36LBL
DFF36LBZT
CLEANING
With the unit turned off and cool to the touch, use a 50/50
solution of vinegar and water and a clean soft cloth to
remove dirt and fingerprints. Clean frame before and
after start-up and again anytime oil or fingerprints are
present. When heated, oil from fingerprints or left over from
manufacturing can permanently discolor the plating.
TOOLS NEEDED:
• Phillips Screwdriver
INSTALLATION
1. Remove the fireplace barrier screen assembly. Lift up
the barrier screen approximately 3/8 inch, then pull
forward to remove it from the fireplace.
2. Install on front bracket per side with two #8 x 1/2-inch
screws each. See Figure 1.
3. Reinstall the barrier screen assembly.
37101-6-0620
INSTALLATION INSTRUCTIONS
DECORATIVE FRONTS
DECORATIVE FRAME MODELS
DVLL48
DFF48FPD
DFF48LBL
DFF48LBZT
Figure 1
Empire Comfort Systems Inc. • Belleville, IL
DVLL60
DFF60FPD
DFF60LBL
DFF60LBZT
4. Insert the extended bracket tabs on the rear of the
Forged Iron Decorative Front into the front brackets
installed in Step 2. See Figure 2.
5. Installation is complete. See Figure 3.
DVLL72
DFF72FPD
DFF72LBL
—
Figure 2
Figure 3
Page 1