Technical Specifications, Drill Stands; Ec Declaration Of Conformity; Machine Characteristics; Machine Parts And Controls - Baier Elektrowerkzeuge BDB 829 Translation Of The Original Instruction Manual

3.2

Technical specifications, drill stands

Drill stands (optional accessories)
Manufacturer
Maximum drilling stroke (mm)
Maximum diameter drilled (mm)
Height (mm)
Width (mm)
Depth (mm)
Weight (kg)
Fastening drive unit/drill to the spindle head via the
motor collar
3.3

EC Declaration of Conformity

We herewith declare, with sole responsibil-
ity, that this product conforms to the follow-
ing standards or normative documents:
EN60745-1:2009+A11:2010
EN61029-2-6:2010
EN55014-1:2006+A1:2009+A2:2011
EN55014-2:2015
EN61000-3-2:2014
EN61000-3-3:2013
In accordance with the provisions of the
Directives
2006/42/EC (Machinery Directive)
2011/65/EU (RoHS Directive)
in conjunction with the safety instructions
documented in the instruction manual and
the specified intended use.
The head of development is authorised to write the
technical documents.
These are available from:
Maschinenfabrik OTTO BAIER GmbH,
Heckenwiesen 26,
71679 Asperg
Germany
Thomas Schwab
Managing Director
Asperg, 19.02.2018
Robert Pichl
Factory Manager
BST 200
Maschinenfabrik OTTO BAIER GmbH
15.5
3.4

Machine characteristics

The machines are equipped with specially devel-
oped electronics with soft start. It monitors the
speed and the green / red indicator lights (items 1
and 2, see Figure ) help to achieve the most
1
favourable work progress and therefore tool-
protecting working conditions.
Visual display
Green: Speed for optimum drilling
performance
Green / red: Speed within the limit range
Red: Speed too low – stopping
If this warning signal is ignored, i.e. the feed is not
reduced, the electronics switch off on overload.
After the diamond core drill bit has stopped, remove
it from the drill hole. The machine can be restarted
immediately.
3.5

Machine parts and controls

Dry Diamond Drill
1
1 Green LED
2 Red LED
3 ON / OFF switch with switch lock
4 Handle
5 Connection cable
6 Gear change knob (1st and 2nd gear)
7 Additional handle (can be mounted for left and
right-handed persons)
8 Open-ended spanner SW36
9 Open-ended spanner SW41
10 Nozzle for dust extraction
11 Internal thread G½"
12 External thread 1¼" UNC
13 Output shaft
14 Extraction tube
15 Clip for fastening extraction tube
16 Soft impact feature ON / OFF switch
570
200
900
320
600
Yes
| 39 |