2.6.7 Service / Maintenance / Repair; Explanation Of The Pictograms On The Machine - Baier Elektrowerkzeuge BDB 829 Translation Of The Original Instruction Manual

2.6.7 Service / Maintenance / Repair

•
If the power tool is dropped or becomes wet,
have it checked.
A possibly damaged power tool is dangerous
and no longer safe to operate. Before using the
power tool again, have it checked by our cus-
tomer service or an authorised service centre of
Maschinenfabrik OTTO BAIER GmbH.
•
Repair and maintenance work may only be
carried out by an authorised workshop of
Maschinenfabrik OTTO BAIER GmbH.
Otherwise, all liability and warranty claims
against Maschinenfabrik OTTO BAIER GmbH
expire.
NOTE
When using new carbon brushes, the machine may
only be operated within the green range for the first
15 minutes - observe LED display in the handle.
•
Ensure that original BAIER spare parts and
original BAIER accessories only are used
when needed.
Original parts are available from authorised
dealers. Use of non original parts can cause
damage to the machine and an increased risk of
accidents.
•
Regular servicing by Maschinenfabrik OTTO
BAIER GmbH or a servicing and repair com-
pany authorised by us is specified.
Many accidents are caused by poorly serviced
and maintained power tools.
2.6.8 Explanation of the pictograms
on the machine
The CE mark on a product means that
the product conforms with all the applica-
ble European regulations and has been
subjected to the prescribed conformity
assessment procedures.
Protection class II equipment
The machine is insulated in such a way
that it has no exposed metal parts that
could be live in the event of a fault. It does
not have a protective earth conductor.
Environmentally friendly disposal of
waste equipment
Waste equipment contains valuable recy-
clable materials which should be reused
or recycled. Batteries, lubricants and sim-
ilar materials must not be allowed to get
into the environment.
Therefore, please dispose of waste equip-
ment through suitable collection systems.
Wear hearing protection!
The typical A-weighted sound pressure
level of this power tool is over 85 dB (A)
– wear ear protectors when working with
the tool!
Read the instruction manual!
Before starting any work with or on the
machine, this instruction manual, the safe-
ty instructions and the warnings must be
read through carefully and observed.
| 37 |