RC-PRO PRO20-GPS Instruction Manual page 7

CAUTIONS WHEN CHARGING:
1. When charging, please put this product in a dry ventilated area and keep
it far away from heat sources or ammable products.
2. When charging, it is recommended to remove the batteries from the drone.
Charging process should be supervised by an adult so as not to cause an
accident. The battery can also be charged while in the drone.
3. After ying, please do not charge the battery if the surface temperature is still
warm. If the battery has been used for a long time, or appears to be swollen,
please replace them.
4. Please make sure that you use the original USB charging cable provided.
5. A battery when not in use for a long time will lose its charge automatically.
Charging or discharging too often may reduce the life of the battery.
DISCLAIMER: You must use the original USB cable and standard 5V wall charger.
WARNING: Never charge with an input stronger than 5V. This can cause the
battery to overheat.
PREPATATION FOR FLIGHT/GPS CALIBRATION
Please choose the spacious indoor or outside environment for ying, also it
requires that it should be ied under the weather of non- snow or non-storm
with wind force less than Level 4. When ying, please DO keep it far away from
the crowd, tree, electric wire, skyscraper, airport or signal transmitting tower, etc.
Step 1: Turn on drone and set down on a level surface*
— *The drone will auto-trim to this level surface.
— All lights blinking red.
6