Troubleshooting - RC-PRO PRO20-GPS Instruction Manual

TROUBLESHOOTING

PROBLEM
Drone's lights are ashing
and no response from the
drone.
The blades spin but the
drone does not take o .
The drone shakes
uncontrollably.
Drone does not hover
accurately.
Drone does not achieve
"Ready to y".
PARTS LIST (Included)
Tripod Wrench X1
We believe that you should make the most out of your drone.
If you are ever in need of advice, service or parts please visit our website
for a list of our retailers.
WWW.RCPRO.CA
1. Transmitter is not paired
to the drone.
2. No battery power.
1. The blades are not
placed properly.
2. The blades are damaged.
The blades are damaged.
1. The blades are damaged.
2. One of the motors is not
spinning in accurate speed.
3. The gyroscope is out of
balance.
4. The drone needs trimming.
No/Weak GPS reception.
A
B
Blade A/B X2
Landing Gear
X2
REASON
Only for charging
14
SOLUTIONS
1. Follow the pairing process.
2. Charge the battery.
1. Make sure your blades are
placed properly according
to page 4.
2. Replace the blades
Replace the blades
1. Replace the blades
2. Replace the motor.
3. Calibrate the gyroscope
(Page 7 step 3).
4. Follow trimming instructions.
1. Wait a few minutes for
GPS reception.
2. Stay away from reception
blocking structures.
USB Cable X1
Screwdriver X1
Blade Cap X2