Step 1; Step 2; Assembly Completion; Maximum Weight - modway EEI-2279 Quick Start Manual

EEI-2279
SWING CHAIR

STEP 1:

Please put all chair parts on a carpeted or padded area.
Find the hardware package inside of the tube on Chair Base (1).
Insert Stand (2) into Chair Base (1) as shown.
Secure by using 2 pieces of Bolt (A) with 2 pieces of Nut (B). Note: Bolt (A) should be inserted by the left side.
Use Allen Wrench (E) and Open Wrench (F) to tighten Bolts (A) and Nuts (B) clockwise until secure.

STEP 2:

Insert Spring Holder (D) into the pre-drilled hole at the top of Stand (2) as shown.
Hang Basket Frame (3) to Stand (2) by using 1 piece of Spring (C) as shown.
Place Cushion (4) to Basket Frame (3) as shown.
3
Ax2 Bx2
Customer Service 908-368-1025︱www.modwayfurniture.com
STEP 2
4
Assembly is completed. The swing chair is ready to enjoy now!
Cx1 Dx1 Ex1
D
C
STEP 1
A
A
1
Fx1
2
Note: Hardware package is
packed inside of the base tube.
B
B
Maximum Weight: 120 KG
Hardware & Tool required
Page 2 of 2