Chery Tiggo 5 T21 Manual page 150

10. External lighting system
3. Function description – Follow Me Home
Function description of external lighting
Low beam
lamp
High beam
lamp
Flash
Training Center of After-Sales Department Chery International
With the key at ON, turn on the low beam lamp switch, and BCM will turn on low
beam lamp.
With the low beam lamp lit, BCM will send CAN signal Low Beam Sts=1 to body
CAN and power CAN respectively.
With the key at ON and low beam lamp on, turn on the high beam lamp switch,
and the high beam lamp will be activated.
With the high beam lamp lit, BCM will send CAN signal High Beam Sts=1 to body
CAN and power CAN respectively.
If the engine is started with the high beam lamp on, the high beam lamp will be
off during startup; after the startup, it will be lit again. However, CAN signal
remains valid.
With the key at ON, operate flash switch, and the high beam lamp will be
activated as flash, with CAN signal High Beam Sts=1 sent to body CAN and
power CAN respectively.
If the engine is started with the flash on, the high beam lamp will be off during
startup; after the startup, it will be lit again. However, CAN signal remains valid.
150